pete46
Highschool Graduate
Posts: 17
|
Post by pete46 on Apr 5, 2010 22:37:00 GMT
Hi newbie on here so hello to you all,recently purchased a 1973 ta22 16 st can i run it on unleaded without any mods it currently running with an additive,thanks pete
|
|
|
Post by ifc63 on Apr 6, 2010 20:06:22 GMT
TA22 is running the 2T-B engine which has an aluminium head and hardened seat inserts as standard. So unleaded is fine. I can vouch for this as both my road-going Sunchasers are 2T-B engined and I've done over 20,000miles over the last 4 years in them with no bother. The only engine to be careful of is the 18R fitted to RA23/RA28 Gen 1's and RA40 Gen 2's as these are cast heads. Either the 2T-G or the 18R-G twin cam engines are OK on unleaded as they have aluminium heads as well.
|
|
pete46
Highschool Graduate
Posts: 17
|
Post by pete46 on Apr 7, 2010 8:52:52 GMT
Thanks very much for the quick responce,i,ll go check the engine no,s will the engine need to be retuned or should i re fuel a couple of times to flush the old fuel through
|
|
|
Post by ifc63 on Apr 7, 2010 10:24:58 GMT
Thanks very much for the quick responce,i,ll go check the engine no,s will the engine need to be retuned or should i re fuel a couple of times to flush the old fuel through No need to retune as designed for the same octane as premium unleaded. If it's a standard TA22 with no engine swap it should be the 2T-B engine as that's the T part of the TA22 designation. Should look like the top one of these pics with the lower one being the 2T-G twin cam: Engine code should be on the VIN plate on the bulkhead anyway.
|
|
|
Post by Uncle Bob on Apr 10, 2010 19:04:46 GMT
Top reply as usual
|
|