My Ms112 Crown Restoration

[chris]

The Crown is progressed well in the last few months, the mechanicals are almost finished. The engine now runs, a mixture of 3 different 5me lumps! The brakes are almost finished, Toyota wanted £70 for a master cylinder seal kit, I found a new complete master cylinder for £43! The servo has been painted, also redone the steering column bulkhead plate as well. (beneath the servo).

The underside is complete, everything removed and repainted or replaced. All brake lines and fuel lines replaced. Had to replace fuel pump for a replacement. Currently running a Volvo 740 pump, however idle pressure 24psi, should be around 33-38psi but road test will confirm.

[harvey]

I used an old manta pump years ago on a supra 2.8 without any probs, never even checked the pressure as the regulator on the fuel rail should sort it out. A bit or tinworm to sort out I see, but should be fairly easy if you have a mig welder.
Good luck and keep us posted with your progress

[tony]

good work and good luck chris. keep us posted with the pics.