gerald7
Highschool Graduate
Posts: 32
|
Post by gerald7 on Jan 23, 2009 0:14:25 GMT
recently I bought the door glass regulators rollers... when I tried to fit it, I find that its wrong size. the one I bought was bigger. I was under the impression that most parts can be used TA22 & TA35/23 ? Anyone know if this is correct one? When I measure it against the rail, its slightly bigger by 2mm. Cheers
|
|
|
Post by Ian2TG on Jan 26, 2009 16:24:54 GMT
is it for the front or rear?
as those ones from ebay are for the front, fitted them to my TA22 with no problems, the rears are harder to get - i ended up repairing my rears with rubber compound!
|
|
gerald7
Highschool Graduate
Posts: 32
|
Post by gerald7 on Jan 27, 2009 2:57:23 GMT
These are for the front.
any ideaS?
|
|
|
Post by Ian2TG on Feb 3, 2009 11:02:01 GMT
they fit on my TA22, the round rollers just lock the window into place at the very top, i don't think its supposed to be a tight fitting, the kidney shaped ones fit into the side rails, is this the same on your '35?
|
|
gerald7
Highschool Graduate
Posts: 32
|
Post by gerald7 on Feb 6, 2009 4:28:11 GMT
Yes I have the kidney shaped ones as well. Yet to install it, but figured out how to install it. just waiting for the bad weather to pass, in case failed, then don't want to be without glass when driving around town. ;D
Rollers fit on top ? I tot it was @ the rails? Lemme go take a few pics when I get back home later.
|
|
gerald7
Highschool Graduate
Posts: 32
|
Post by gerald7 on May 4, 2009 6:14:58 GMT
I talked to a friend who had the ta28... he said this thing is useless and cannot use. I think I agree. Cos there is no way to fit em!
|
|
|
Post by sidta23 on May 4, 2009 8:35:38 GMT
You need to contact airfireman1 he can get bearings the same size as the rear window plastic ones you just bolt them in, he got them for me & posted them from Australia they were pretty cheap cant remember exactly, he is a top bloke should be able to help you.
|
|